Parts: Handlebar Grips for Mini & Maxi

SKU: 1415

• Product Details

  This set of two rubber handle bar grips make it easy to update the T-grip portion of your scooter.

  To install:

  1. Use scissors to remove stock grips and any remaining rubber fragments.
  2. Pour water into new grips, then pour it out. This step temporarily lubricates grips.
  3. Slide wet grips onto T-bar, butting grip edges against the shaft of the T-bar. (Proper positioning is very important to keep grips from sliding off.)
  4. Allow grips to dry before riding.

Parts: 80mm Rear Wheel for Mini & Maxi

SKU: AC0021

• Product Details

  The long-lasting polyurethane wheel comes with the bearings and spacer already installed, making switching your wheels quick and easy. Order two if replacing both rear wheels. 80mm.

  To install:

  1. Use a socket wrench with No. 4 hex head attached along with a spare No. 4 hex key
  2. Hold the square side of the axle still using the No. 4 hex key; loosen circular side of axle using socket wrench
  3. Pop the wheel out, replace it with a new one, and reattach the screw.

• Video

Parts: 120mm Clear Front Wheel for Mini & Sprite

SKU: AC5005B

• Product Details

  When pitted sidewalks and bumpy streets wear down wheels, it’s easy to replace them. Each wheel comes with bearings and spacer pre-installed. (Order two if replacing both front wheels.) 120mm.  Important note: Left wheel is reverse-threaded and is the opposite of righty-tighty! 

   

  To install:

  1. Use a 12mm wrench and a No. 4 hex key
  2. Hold back side of axle still using hex key; loosen outside of axle using 12mm wrench
  3. Pop the wheel out, replace it with a new one, and reattach the screw.

• Video

Parts: T-bar for Mini Original
Children

SKU: 1140

• Product Details

  T-bar for Micro Mini Original. Compatible with Micro Mini Original, Micro Mini 2-Go, Micro Mini 3in1, and Micro Mini Sporty

• Specs

  • Age Range :
    Children

Parts: Deck for Mini Original

SKU: 1337

• Product Details

  A brand new deck makes your whole scooter look like new, especially when you combine it with matching handlebar covers (sold separately).

  To install:

  1. Use a Phillips-head screwdriver to remove the eight black screws on the underside of the scooter.
  2. Remove the colored deck from the black frame, lifting up from the rear end of the scooter first.
  3. Position the new deck on the black frame, snapping the rear end on first.
  4. Replace the eight screws.

• Video

Parts: Brake for Mini

SKU: 1687

• Product Details

  This tiny part works hard to keep riders safe in stop-and-go traffic. Check yours for wear periodically and replace when necessary. To install: Use a Phillips-head screwdriver to unfasten the eight black screws on the underside of the scooter. Remove the colored deck from the black frame, lifting up from the rear of the scooter first. Unfasten the two silver screws next to the brake, then remove the bolts and stock brake. Replace with new brake, reattaching bolts. Position the deck on the black base, rear end first, and replace the eight screws.

O-Bar
Handlebar Only

• Product Details

  O-bar (handlebar only) for Micro Mini, ideal for riders ages 2-3. Does not include Seat attachment or scooter.

  Top "O" of handlebar can be reached from 17-20 inches thanks to its circular shape; the material of the "O" portion is a soft and easy for little kids' hands to grip. If you need an O-bar with adjustable seat, please refer to the following product: https://microkickboard.com/products/mini-seat-o-bar

  We have found that this handlebar is preferable (over the taller T-bar) for kiddos standing between 20-30 inches tall.

Parts: Bolt & Screw for Mini Rear Wheel & Shank

SKU: 1138

• Product Details

  Replacing the hardware on your rear wheel/front wheel is quick and easy. Comes complete with instructions. (Not compatible with Micro Maxi).

  To install:

  1. Using two Allen keys, insert one into the square side of the bolt and hold it steady. Insert the second Allen key into the round side of the bolt and rotate counterclockwise to loosen.
  2. Replace with new bolt and screw. Tighten down, holding the square side steady with one Allen key and rotating the other Allen key clockwise in the round side.

Parts: B-Bend Springs

SKU: 1227

• Product Details

  This set of two wire springs fit behind the two front wheels, helping your scooter maintain proper steering tension.

  To install:

  1. Look for the two screws on the bottom of the scooter, just behind the two front wheels. Remove the screws.
  2. Remove the rectangular black spacer.
  3. Use a flat head screwdriver to pry out the stock b-bend springs.
  4. Pull the wheels away from the b-bend, insert the spring into place, and press down with your thumb.
  5. Replace the black spacer and screws.

• Video

Parts: Left Axle for Mini

SKU: 4662

• Product Details

  Left Axle for Mini

Parts: Steering Link
Bolt/Nut/Washer for Mini & Maxi

SKU: 1344

• Product Details

  Steering Link (bolt/nut/washer) for Micro Mini / Maxi - Part #1344. This part attaches one side of the steering crossbar. Compatible with Micro Mini and Micro Maxi only

Parts: Right Axle for Mini

SKU: 4660

• Product Details

Parts: ABEC Bearings

SKU: AC1007

• Product Details

  Pair of replacement ABEC precision Bearings for scooter wheel. Our polyurethane wheels require (2) bearings apiece. Spacer not included. 

Parts: Left Shank for Mini

SKU: 1144

• Product Details

  The sturdy shank attaches the left front wheel to the chassis.  Compatible with Mini Micro and Maxi Deluxe only

Parts: Left Side Washer

SKU: MMWL1146

• Product Details

  Minimize friction and optimize pressure between the wheel and the scooter bottom.

  To install:

  1. First, take off the old wheel. Using two Allen keys, insert one into the square side of the bolt and hold it steady. Insert the second Allen key into the round side of the bolt and rotate counterclockwise to loosen. Remove the wheel.
  2. Remove the screw holding the shank to the scooter.
  3. Remove the washer between the shank and scooter bottom.
  4. Place the new washer between the shank and scooter bottom.
  5. Replace the shank, securing it to the scooter chassis by tightening the screw.
  6. Slide the square side of the bolt into the shank so the round side of the bolt points to the outside of the scooter.
  7. Slide the wheel onto the bolt.
  8. Using two Allen keys, insert one into the square side of the bolt and hold it steady. Insert the second Allen key into the round side of the bolt and rotate clockwise to tighten.

Parts: Right Side Washer

SKU: MMWR1146

• Product Details

  Reduce friction and ensure even pressure between the wheel and the scooter bottom

  To install:

  1. First, take off the old wheel. Using two Allen keys, insert one into the square side of the bolt and hold it steady. Insert the second Allen key into the round side of the bolt and rotate counterclockwise to loosen. Remove the wheel.
  2. Remove the screw holding the shank to the scooter.
  3. Remove the washer between the shank and scooter bottom.
  4. Place the new washer between the shank and scooter bottom.
  5. Replace the shank, securing it to the scooter chassis by tightening the screw.
  6. Slide the square side of the bolt into the shank so the round side of the bolt points to the outside of the scooter.
  7. Slide the wheel onto the bolt.
  8. Using two Allen keys, insert one into the square side of the bolt and hold it steady. Insert the second Allen key into the round side of the bolt and rotate clockwise to tighten.

Parts: Right Shank for Mini

SKU: 1145

• Product Details

  The sturdy shank attaches the right front wheel to the chassis. Compatible with Mini Micro and Maxi Deluxe only

Parts: Steering Clip

SKU: 1141

• Product Details

  The steering clip installs easily into the bottom of the T-bar or pilot stick. Just look for the triangle-shaped stopper.

  To install:

  1. Remove the old steering clip from the bottom of the T-bar or pilot stick.
  2. Pinch the V-shaped part of the spring together to push in both sides.
  3. Insert the pointed end into the bottom of the T-bar, making sure to line up the triangle shaped stopper with the opening.

Parts: Steering Crossbar for Mini & Maxi
Crossbar Only

SKU: 1147

• Product Details

  Steering Crossbar for Mini and Maxi (crossbar only) - Part #1147. Compatible with Mini and Maxi only

Parts: Set of Deck Screws
8 for Mini Deck

SKU: 1150

• Product Details

  Set of 8 Mini Deck Screws - part #1150. Used to affix Micro Mini Deck onto black frame. Compatible with Micro Mini Classic

Parts: Screws
2 & Spacer Plate for Mini & Maxi B-Bends

SKU: 1235

• Product Details

  Screws (x2) and Spacer Plate for Mini/Maxi b-bends - Part #1235 (b-bends not included). Compatible with Micro Mini Classic, Micro Mini 3in1, Micro Mini 2-Go, and Micro Maxi only (not compatible with Mini Sporty)

Parts: Instruction Manual Packet
Teen Adult

SKU: 105

• Product Details

  Misplace your instruction manual packet for your Mini or Maxi? We have you covered! Instruction Manual Packet (with x2 No. 4 Allen Keys) for Mini & Maxi - Part #105-Packet-Mini-Maxi

• Specs

  • Age Range :
    Teen Adult

Parts: B-Bend Plate for Mini & Maxi

SKU: 10402

• Product Details

  B-Bend Plate for Mini & Maxi

Parts: Replacement Seat
Seat Only for Mini 3in1

SKU: 1417

• Product Details

  Replacement Seat (seat only) for Micro Mini 3in1. Connector hardware not included. Compatible with Micro Mini 3in1

Parts: Spacer between bearings, 10.25mm - Mini & Maxi wheels

SKU: 1055

• Product Details

  Spacer between bearings, 10.25mm - Mini & Maxi wheels